Although Citizen refers to the energy cell as a 'secondary battery' in their literature and manuals, this wording can be misleading. Understand how your Eco-Drive works. If your Eco-Drive watch stops completely, loses time or ticks erratically, it needs to be recharged, which can be done by exposing it to light.
Ideally, the watch should never stop, since it will remained charged up by normal day-to-day exposure to various sources of light as it is worn. However, if the watch does not receive enough light if it is left in a box or drawer, for example , it will lose power and need recharging. Determine the amount of time and sunlight needed. The time required to recharge varies slightly by model, so consult your manual or the Eco-Drive website see References for details.
After taking off the watch, put it in a location where the dial is exposed to bright light, such as by a window. Page 12 Charging your watch When the watch reaches a low charge state insufficient charge warning function When the power reserve becomes low, the second hand moves once every two seconds. This is the insufficient charge warning function.
Be sure to fully charge your watch. Page Charging Time By Environment Charging your watch Charging time by environment Below are the approximate times required for charging when exposing the watch dial to light continuously. Please use this table as a reference only. Charging time approx. Illuminance To start working To become fully Environment To work for lx normally when the cell charged when the cell is one day is discharged discharged 2 minutes 50 minutes 9 hours A fluorescent lamp or interior lighting does not have sufficient illumination to charge the rechargeable cell efficiently.
Page Adjusting The Time Adjusting the time Pull the crown out to position when the second hand points to 0 second. All the hands stop. Rotate the crown to adjust the time. Pay particular attention to the hand to ensure AM or PM time is set properly. Page 16 Adjusting the time Push the crown in to position in accordance with a reliable time source to finish the procedure. Otherwise the date indication may change improperly.
Pull the crown out to position. Page 18 Adjusting the calendar Rotate the crown counterclockwise to adjust the date. Push the crown in to position to finish the procedure. Press and hold button for two seconds. Push the crown in to position. Press button Page Troubleshooting Troubleshooting If you have a problem with your watch, check the table below. Symptoms Remedies Page Movement of a hand seems strange The second hand moves 8 to 11 Fully charge the watch.
The second hand does not move. Page Troubleshooting Troubleshooting Symptoms Remedies Page The chronograph is incorrect While the second hand is moving once every two Chronograph does not 8 to 11 seconds the insufficient charge warning function , work.
Chronograph stops Reset the chronograph by pressing button halfway. This may result in your watch loosing charge. Online guide. Instruction manual. Instruction manual Abbreviated instruction. Instruction manual Diver M. Abbreviated instruction. Setting Instruction Abbreviated instruction.
0コメント